The present work describes an experimental study about the shear strength and the mode I fracture toughness of adhesive joints with substrates pre-treated by pulsed laser ablation. An ytterbium-doped pulsed fiber laser was employed to perform laser irradiation on AA6082-T4 alloy. Morphological and chemical modifications were evaluated by means of surface profilometry, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Thick adherend shear tests were carried out in order to assess the shear strength while the mode I fracture toughness was determined using the double cantilever beam. For comparison, control samples were prepared using classical surface degreasing. The results indicated that laser ablation has a favorable effect on the mechanical behavior of epoxy bonded joints; however, while a+20% increase was recorded for shear strength, a remarkable threefold enhancement of fracture toughness was observed with respect to control samples. XPS analyses of treated substrates and SEM observations of the fracture surfaces indicated that laser pre-treatment promoted chemical and morphological modifications able to sustain energy dissipation through mechanical interlocking. As a result cohesive failure within the adhesive bond-line was enabled under predominant peel loading.

On the effect of pulsed laser ablation on shear strength and mode I fracture toughness of Al/epoxy adhesive joints

ALFANO, Marco;FURGIUELE, Franco;
2015-01-01

Abstract

The present work describes an experimental study about the shear strength and the mode I fracture toughness of adhesive joints with substrates pre-treated by pulsed laser ablation. An ytterbium-doped pulsed fiber laser was employed to perform laser irradiation on AA6082-T4 alloy. Morphological and chemical modifications were evaluated by means of surface profilometry, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Thick adherend shear tests were carried out in order to assess the shear strength while the mode I fracture toughness was determined using the double cantilever beam. For comparison, control samples were prepared using classical surface degreasing. The results indicated that laser ablation has a favorable effect on the mechanical behavior of epoxy bonded joints; however, while a+20% increase was recorded for shear strength, a remarkable threefold enhancement of fracture toughness was observed with respect to control samples. XPS analyses of treated substrates and SEM observations of the fracture surfaces indicated that laser pre-treatment promoted chemical and morphological modifications able to sustain energy dissipation through mechanical interlocking. As a result cohesive failure within the adhesive bond-line was enabled under predominant peel loading.
2015
Adhesive bonding
Laser treatment
Fracture toughness
Shear strength
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11770/145091
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 15
  • ???jsp.display-item.citation.isi??? 15
social impact