The methane adsorption properties of High Surface Activated Carbon (HSAC) samples were evaluated at room temperature (298 K) and pressure up to 3.5 MPa using a new optimized volumetric apparatus f-PcT (fast Pressure–concentration–Temperature) for accurate and reliable gas adsorption measurements. A comprehensive characterization of different activated carbon samples was carried out by means of helium picnometry for the skeletal density evaluation, by the Brunauer–Emmett–Teller (BET) method for the measurement of the surface area, by Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) for topography and long-range order estimation, respectively. All the adsorption data were evaluated by Langmuir/Tóth isotherm model with a very high accuracy. Comparison with data available in the literature shows a good agreement in terms of maximum methane uptake on similar materials and an enhanced performance for the reversible adsorption at very low pressure. In fact, the probed HSAC samples show both higher methane storage values for pressure up to 1.5 MPa and totally reversible methane uptake up to many cycles without any treatment in between. Furthermore, their adsorption properties are stable also after air exposure. These results represent the starting point for a real and efficient alternative method to the natural gas storage for static and/or automotive applications.

Higher methane storage at low pressure and room temperature in new easily scalable large-scale production activated carbon for static and vehicular applications

Policicchio A;AGOSTINO, Raffaele Giuseppe;Aloise A;GIORDANO, Girolamo
2013-01-01

Abstract

The methane adsorption properties of High Surface Activated Carbon (HSAC) samples were evaluated at room temperature (298 K) and pressure up to 3.5 MPa using a new optimized volumetric apparatus f-PcT (fast Pressure–concentration–Temperature) for accurate and reliable gas adsorption measurements. A comprehensive characterization of different activated carbon samples was carried out by means of helium picnometry for the skeletal density evaluation, by the Brunauer–Emmett–Teller (BET) method for the measurement of the surface area, by Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) for topography and long-range order estimation, respectively. All the adsorption data were evaluated by Langmuir/Tóth isotherm model with a very high accuracy. Comparison with data available in the literature shows a good agreement in terms of maximum methane uptake on similar materials and an enhanced performance for the reversible adsorption at very low pressure. In fact, the probed HSAC samples show both higher methane storage values for pressure up to 1.5 MPa and totally reversible methane uptake up to many cycles without any treatment in between. Furthermore, their adsorption properties are stable also after air exposure. These results represent the starting point for a real and efficient alternative method to the natural gas storage for static and/or automotive applications.
2013
Reversible methane storage; Natural gas; Adsorption
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11770/146217
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 89
  • ???jsp.display-item.citation.isi??? 83
social impact