Lightweight aggregate concrete (LWAC) has gained popularity as an alternative to ordinary concrete for structural purposes, due to its higher strength-to-weight ratio. The present work aims to present novel numerical results of complete failure simulations performed on pre-cracked beams made of LWAC, subjected to a mixed-mode fracture test. To this end, an innovative simulation algorithm for crack propagation within a multiscale framework has been adopted, specifically conceived for predicting microcracking in quasi-brittle heterogeneous materials under general loading conditions; such a strategy allows to take into account both the continuous crack propagation along a non-prescribed path and the crack penetration through a material interface. Path tracking for continuous crack propagation has been performed by using an advanced geometry optimization method coupling a moving mesh approach and a gradient-free optimization solver, whereas crack penetration has been simulated by means of a simplified re-initiation criterion at the interface, involving a material characteristic length. Several numerical experiments have been carried out, in order to investigate the influence of the Young’s modulus of lightweight aggregates on the peak and post-peak behavior. These results have been validated by comparing them with those obtained from fully homogenized analyses based on the LEFM approach.

Mixed-mode fracture in lightweight aggregate concrete by using a moving mesh approach within a multiscale framework

GRECO, Fabrizio;Leonetti L;
2015-01-01

Abstract

Lightweight aggregate concrete (LWAC) has gained popularity as an alternative to ordinary concrete for structural purposes, due to its higher strength-to-weight ratio. The present work aims to present novel numerical results of complete failure simulations performed on pre-cracked beams made of LWAC, subjected to a mixed-mode fracture test. To this end, an innovative simulation algorithm for crack propagation within a multiscale framework has been adopted, specifically conceived for predicting microcracking in quasi-brittle heterogeneous materials under general loading conditions; such a strategy allows to take into account both the continuous crack propagation along a non-prescribed path and the crack penetration through a material interface. Path tracking for continuous crack propagation has been performed by using an advanced geometry optimization method coupling a moving mesh approach and a gradient-free optimization solver, whereas crack penetration has been simulated by means of a simplified re-initiation criterion at the interface, involving a material characteristic length. Several numerical experiments have been carried out, in order to investigate the influence of the Young’s modulus of lightweight aggregates on the peak and post-peak behavior. These results have been validated by comparing them with those obtained from fully homogenized analyses based on the LEFM approach.
2015
Multiscale methods; Linear elastic fracture mechanics; Lightweight aggregate concrete; Mixed mode; Crack propagation analysis; Three-point bending test
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11770/151698
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 42
  • ???jsp.display-item.citation.isi??? 41
social impact