Polymeric electrolytes are very useful for their technological applications in different electrochemical devices such as batteries, electrochromic devices, smart windows, etc. One of the most studied solid electrolyte system is PEO (poly-ethylene oxide) complexed with various lithium salts. A limitation of this polymer electrolyte is low ionic conductivity. However, nanoscale manipulation of the solid polymer electrolyte has the potential to address this issue. This work discusses how it is possible to increase the PEO conductivity when this polymer is contained in nanostructures, specifically nanopores. The nanostructures used are alumina filtration membranes (thickness = 6 μm, diameter = 13 mm) with three different pore sizes 0.02 μm, 0.1 μm and 0.2 μm. Electrochemical characterization has been performed with an HP4194A Impedance/Gain phase analyser and Solartron 1260 Impedance/Gain phase analyser. The former instrument tests these films at a high frequency (from 100 Hz to 40 MHz) while the later at low frequency (from 1 Hz to 1 MHz). From these experiments, it has been determined that two regions of ion conduction exit. One is conduction through the bulk polymer electrolyte in the pores while the other is an interfacial conduction at the interface between the pore walls and the PEO electrolyte. The conductivity of the PEO is increased when confined in these nanostructures.

Impedance spectroscopy of PEO-lithium triflate confined in nanopores of alumina membranes

Castriota, M.
;
2005-01-01

Abstract

Polymeric electrolytes are very useful for their technological applications in different electrochemical devices such as batteries, electrochromic devices, smart windows, etc. One of the most studied solid electrolyte system is PEO (poly-ethylene oxide) complexed with various lithium salts. A limitation of this polymer electrolyte is low ionic conductivity. However, nanoscale manipulation of the solid polymer electrolyte has the potential to address this issue. This work discusses how it is possible to increase the PEO conductivity when this polymer is contained in nanostructures, specifically nanopores. The nanostructures used are alumina filtration membranes (thickness = 6 μm, diameter = 13 mm) with three different pore sizes 0.02 μm, 0.1 μm and 0.2 μm. Electrochemical characterization has been performed with an HP4194A Impedance/Gain phase analyser and Solartron 1260 Impedance/Gain phase analyser. The former instrument tests these films at a high frequency (from 100 Hz to 40 MHz) while the later at low frequency (from 1 Hz to 1 MHz). From these experiments, it has been determined that two regions of ion conduction exit. One is conduction through the bulk polymer electrolyte in the pores while the other is an interfacial conduction at the interface between the pore walls and the PEO electrolyte. The conductivity of the PEO is increased when confined in these nanostructures.
2005
Chemical Engineering (all); Materials Chemistry2506 Metals and Alloys; Physics and Astronomy (all)
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11770/284656
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 7
  • ???jsp.display-item.citation.isi??? 6
social impact