UMBRELLO, Domenico
UMBRELLO, Domenico
Dipartimento di Ingegneria Meccanica, Energetica e Gestionale
2D FE Prediction of Surface Alteration of Inconel 718 under Machining Condition
2016-01-01 Rana, K; Rinaldi, S; Imbrogno, S; Rotella, G; Umbrello, Domenico; M'Saoubi, R; Ayvar Soberanis, S.
2D Finite Element Model and Microstructural Changes During Cutting of Ti6Al4V in Dry Condition
2016-01-01 Imbrogno, S.; Rinaldi, S.; Seara, B.; Arrazola, P. J.; Rotella, G.; Umbrello, Domenico
3D FE simulation of semi-finishing machining of Ti6Al4V additively manufactured by direct metal laser sintering
2018-01-01 Imbrogno, Stano; Rinaldi, Sergio; Raso, Antonio; Bordin, Alberto; Bruschi, Stefania; Umbrello, Domenico
3D Finite Element Analysis of Tool Wear in Machining
2008-01-01 Attanasio, A; Ceretti, E; Rizzuti, S; Umbrello, Domenico; Micari, F.
3D finite element modelling of surface modification in dry and cryogenic machining of EBM Ti6Al4V alloy
2017-01-01 Umbrello, D.; Bordin, A.; Imbrogno, S.; Bruschi, S.
A clustering approach for determining the optimal process parameters in cutting
2010-01-01 Umbrello, Domenico; Ambrogio, Giuseppina; Filice, Luigino; Guerriero, Francesca; Guido, R.
A critical analysis on the friction modelling in orthogonal machining
2007-01-01 Filice, Luigino; Micari, F.; Rizzuti, S.; Umbrello, Domenico
A Hybrid FEM-ANN Approach for Predicting Residual Stresses and the Optimal Cutting Conditions during Hard Turning of AISI 52100 Bearing Steel
2008-01-01 Umbrello, Domenico; Ambrogio, G.; Filice, L.; Shivpuri, R.
A hybrid finite element method-artificial neural network approach for predicting residual stresses and the optimal cutting conditions during hard turning of AISI 52100 bearing steel
2008-01-01 Umbrello, Domenico; Ambrogio, G.; Filice, Luigino; Shivpuri, R.
A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel
2010-01-01 Umbrello, Domenico; J. C., Outeiro; R. M., Saoubi; A. D., Jayal; I. S., Jawahir
A Simple Inverse Procedure to Determine Heat Flux on the Tool in Orthogonal Cutting
2006-01-01 J., Yvonnet; Umbrello, Domenico; F., Chinesta; F., Micari
Abrasive and Diffusive Tool Wear Simulation
2009-01-01 Umbrello, Domenico; A., Attanasio
ALE simulation of orthogonal cutting: A new approach to model heat transfer phenomena at the tool-chip interface
2007-01-01 Ceretti, E.; Filice, Luigino; Umbrello, Domenico; Micari, F.
An experimental investigation of residual stresses in hard machining of AISI 52100 steel
2011-01-01 Umbrello, Domenico; Caruso, S.; Outeiro, J. C.; Filice, L.; Micari, F.
An Investigation of the Effects of Cutting Conditions, Tool Edge Geometry and Workpiece Hardness on Surface Integrity in Orthogonal Machining of AISI 52100 Steel
2010-01-01 Umbrello, Domenico; A. D., Jayal; O. W., Dillon; I. S., Jawahir
Analysis of Surface Integrity in Dry and Cryogenic Machining of AZ31B Mg Alloys
2011-01-01 Z., Pu; S., Caruso; Umbrello, Domenico; O. W., Dillon; Jr, ; D. A., Puleo; I. S., Jawahir
Analysis of the White Layers formed during Machining of hardened AISI 52100 Steel under Dry and Cryogenic Cooling Conditions
2013-01-01 Umbrello, Domenico
An ANN approach for prediction surface residual stresses and desired cutting conditions during hard turning
2007-01-01 Umbrello, Domenico; Ambrogio, Giuseppina; Filice, L; Shivpuri, R.
Application of NN technique for predicting the in-depth residual stresses during hard machining of AISI 52100 steel
2008-01-01 Ambrogio, Giuseppina; Filice, L; Shivpuri, R; Umbrello, Domenico
Application of the Nodal Integrated Finite Element Method to Cutting: a Preliminary Comparison with the “Traditional” FEM Approach
2011-01-01 Greco, F.; Umbrello, Domenico; DI RENZO, S.; Filice, L.; Alfaro, I.; Cueto, E.