PURPOSE: To analyze the surface roughness of porcine corneas after excimer laser ablation with and without the smoothing procedure by means of atomic force microscopy. METHODS: Excimer laser photorefractive keratectomy (PRK) was performed on eight porcine corneas. Immediately following the procedure, smoothing was performed on four corneas using a viscous solution of 0.25% sodium hyaluronate. The corneas were examined in balanced salt solution after fixation in 2.5% glutaraldehyde solution using atomic force microscopy. Quantitative analysis of the ablated stromal surface topography was performed using the section analysis module of the atomic force microscopy software. Repeated measurements were made over small areas (<= 50 mu m(2)) near the center of each ablation, with a vertical resolution of <1 nm. RESULTS: Images of the ablated stromal surface showed undulations and granule-like features on the ablated surface of the specimens. The specimens on which the smoothing procedure was performed (root-mean-square [RMS] rough: 0.152 +/- 0.014 mu m) were more regular (P<.001) than those on which PRK alone was performed (RM<S rough: 0.229 +/- 0.018 mu m). CONCLUSIONS: Atomic force microscopy analysis requires a simpler preparation of the specimens with respect to that necessary for scanning electron microscopy; for this reason, atomic force microscopy techniques are more reliable for the study of biological surfaces and prove to be a feasible method to establish the differences when comparing different laser techniques. Our investigations highlight that although the laser cut of scanning-spot excimer laser systems is precise in removing even the smallest amounts of tissue, the smoothing technique may still be useful to reduce post-ablation roughness.

Roughness of excimer laser ablated corneas with and without smoothing measured with atomic force microscopy

De Santo MP;BARBERI, Riccardo Cristoforo;
2005-01-01

Abstract

PURPOSE: To analyze the surface roughness of porcine corneas after excimer laser ablation with and without the smoothing procedure by means of atomic force microscopy. METHODS: Excimer laser photorefractive keratectomy (PRK) was performed on eight porcine corneas. Immediately following the procedure, smoothing was performed on four corneas using a viscous solution of 0.25% sodium hyaluronate. The corneas were examined in balanced salt solution after fixation in 2.5% glutaraldehyde solution using atomic force microscopy. Quantitative analysis of the ablated stromal surface topography was performed using the section analysis module of the atomic force microscopy software. Repeated measurements were made over small areas (<= 50 mu m(2)) near the center of each ablation, with a vertical resolution of <1 nm. RESULTS: Images of the ablated stromal surface showed undulations and granule-like features on the ablated surface of the specimens. The specimens on which the smoothing procedure was performed (root-mean-square [RMS] rough: 0.152 +/- 0.014 mu m) were more regular (P<.001) than those on which PRK alone was performed (RM
2005
Atomic Force Microscopy; CORNEA MECHANICAL-PROPERTIES; PHOTOREFRACTIVE KERATECTOMY
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11770/127499
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? 0
  • Scopus 23
  • ???jsp.display-item.citation.isi??? 21
social impact