An innovative control strategy, which is based on the Robust Model Predictive Control (MPC) methodology, was developed with thepurpose of optimizing the engine thermal management; the proposed control strategy adjusts the coolant flow rate by means of anelectric pump, in order to bring the cooling system to operate around the onset of nucleate boiling. In the present paper, the advantagesof the proposed cooling approach are evaluated along the NEDC homologation cycle, which was both simulated and replicated bymeans of laboratory tests; the latter include coolant, lubricant and wall temperature measurements. Special attention was reserved tothe warm-up period. The case considered herein is that of a Spark Ignition engine, about 1.2 dm3 displacement, and a comparison withstandard crankshaft driven pump is included. The proposed strategy makes use of a dynamic model of the cooling system of an ICEthat is able to predict the heat transfer both under single-phase forced convection and in the presence of nucleate or saturated boiling.The model, which was widely validated by experimental tests, also defines a metrics for establishing the heat transfer mechanisminside the engine and for estimating the distance of the engine thermal state from the onset of nucleate boiling. Results show that thedeveloped MPC algorithm is robust in terms of disturbance rejections, respects the defined system constraints and it is effective indecreasing the warm-up time and in reducing the coolant flow rate under fully warmed conditions as compared to the standardmechanical pump.
Scheda prodotto non validato
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo
|Titolo:||A Novel Cooling System Control Strategy for Internal Combustion Engines|
|Data di pubblicazione:||2016|
|Appare nelle tipologie:||1.1 Articolo in rivista|