This work presents a comprehensive experimental study on the effect of pulsed laser ablation (Yb-fiber) on Ti6Al4V titanium alloy substrates for adhesive bonding. The modification of surface morphology and chemistry is assessed by means of SEM, XRD and wettability measurements. In addition, surface and subsurface mechanical properties are probed through an extensive series of instrumented indentation tests. Based on the results of the aforementioned analyses, a suitable processing window is identified and adhesive bonded T-peel joints are fabricated and tested. The obtained results indicate that pulsed laser irradiation can substantially improve the performance of Ti6Al4V/epoxy joints.
Surface modification of Ti6Al4V alloy by pulsed Yb-laser irradiation for enhanced adhesive bonding
Rotella G;Alfano M;Candamano S
2015-01-01
Abstract
This work presents a comprehensive experimental study on the effect of pulsed laser ablation (Yb-fiber) on Ti6Al4V titanium alloy substrates for adhesive bonding. The modification of surface morphology and chemistry is assessed by means of SEM, XRD and wettability measurements. In addition, surface and subsurface mechanical properties are probed through an extensive series of instrumented indentation tests. Based on the results of the aforementioned analyses, a suitable processing window is identified and adhesive bonded T-peel joints are fabricated and tested. The obtained results indicate that pulsed laser irradiation can substantially improve the performance of Ti6Al4V/epoxy joints.| File | Dimensione | Formato | |
|---|---|---|---|
|
CIRP_1309_proof.pdf
Open Access dal 28/06/2017
Descrizione: DOI: https://doi.org/10.1016/j.cirp.2015.04.042
Tipologia:
Documento in Post-print
Licenza:
Creative commons
Dimensione
2.26 MB
Formato
Adobe PDF
|
2.26 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
