The aim of this study was obtaining good deposits of stellite-6 by Cold Gas Dynamic Spray (CGDS), in terms of low porosity and good adhesion and cohesion. In fact, the high strength and melting point of the investigated alloy lead to a high value of the particle critical velocity in CGDS and, therefore, good quality results are difficult to achieve. The tribological properties of the coatings were analyzed by micro-hardness measurements and pin-on-disk wear tests. Results revealed that spraying parameters can be optimized to obtain almost pore-free coatings.
Tribological properties of wear-resistant coatings obtained by cold gas dynamic spray
Magaro P.
;Maletta C.;
2018-01-01
Abstract
The aim of this study was obtaining good deposits of stellite-6 by Cold Gas Dynamic Spray (CGDS), in terms of low porosity and good adhesion and cohesion. In fact, the high strength and melting point of the investigated alloy lead to a high value of the particle critical velocity in CGDS and, therefore, good quality results are difficult to achieve. The tribological properties of the coatings were analyzed by micro-hardness measurements and pin-on-disk wear tests. Results revealed that spraying parameters can be optimized to obtain almost pore-free coatings.File in questo prodotto:
Non ci sono file associati a questo prodotto.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
