Durability Under Thermal Actions of Concrete Elements Confined with an Inorganic Matrix Fiber-Reinforced Composites

Fiber reinforced composite materials are starting to have very widespread use for rehabilitation and strengthening of existing concrete structures. As demonstrated by several experimental results, the use of composites made with fibers and inorganic matrix (such as cement based or lime based matrix) is very effective from a mechanical point of view. Nevertheless, there are legitimate concerns with the durability aspects of strengthened elements, which have hindered the widespread use of these composite materials in structural applications. The exposure of confined concrete elements to environmental actions could reduce the beneficial effects of the strengthening. For a better understanding of this aspect, through an experimental campaign, the paper aims to investigate the effects of thermal actions on the structural response of concrete elements confined with an inorganic matrix fiberreinforced composite system, consisting of high strength fibers in the form of fabric embedded into a cement-based matrix. Cylindrical concrete specimens confined with one-layer of PBO (Polyparaphenylenebenzobisthiazole)-FRCM (Fiber Reinforced Cementitious Matrix) system were exposed to several (five) thermal cycles at different temperatures (100 and 200 °C) and, then tested under compression loads at ambient temperature (20 °C). When the desired temperature was reached, it was kept constant for 6 h and subsequently, the concrete specimens were cooled down freely to ambient temperature. The obtained results in terms of failure modes, peak strength, axial and radial strains were analysed, in order to evidence the effects of the thermal actions on the mechanical properties of confined concrete elements.