Spin-transfer torque magnetic random-access memory (STT-MRAM) has been demonstrated to be a leading candidate for on-chip memory technology. In this work, double-barrier magnetic tunnel junction (DMTJ) is exploited to define STT-MRAMs at the circuit-level (i.e. at the bitcell level). The DMTJ-based bitcells are built from tunnel-FET technology and benchmarked against a calibrated 10 nm-FinFET technology model. STT-MRAM bitcells operate in the ultra-low voltage domain, and are evaluated in terms of energy-efficiency and area. Simulation results points out that the tunnel-FET based solution is the most energy-efficient alternative, in terms of energy-delay-product (EDP), when evaluated at the 6 corner. Quantitatively, when compared against the FinFET-based design, the TFET-based bitcell exhibits 58% lower EDP, 40% better delay and 34% reduced writing energy. Finally, a leakage analysis was also carried out, showing that TFET-based STT-MRAM bitcells have lower leakage current as compared to the FinFET-based counterpart.

Exploiting TFET-based technology for energy-efficient STT-MRAM cells

Taco Ramiro.
2023-01-01

Abstract

Spin-transfer torque magnetic random-access memory (STT-MRAM) has been demonstrated to be a leading candidate for on-chip memory technology. In this work, double-barrier magnetic tunnel junction (DMTJ) is exploited to define STT-MRAMs at the circuit-level (i.e. at the bitcell level). The DMTJ-based bitcells are built from tunnel-FET technology and benchmarked against a calibrated 10 nm-FinFET technology model. STT-MRAM bitcells operate in the ultra-low voltage domain, and are evaluated in terms of energy-efficiency and area. Simulation results points out that the tunnel-FET based solution is the most energy-efficient alternative, in terms of energy-delay-product (EDP), when evaluated at the 6 corner. Quantitatively, when compared against the FinFET-based design, the TFET-based bitcell exhibits 58% lower EDP, 40% better delay and 34% reduced writing energy. Finally, a leakage analysis was also carried out, showing that TFET-based STT-MRAM bitcells have lower leakage current as compared to the FinFET-based counterpart.
2023
double-barrier MTJ (MTJ)
FinFET
Magnetic Tunnel Junction (MTJ)
STT-MRAM
Tunnel FET
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11770/376206
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact