MORANO, CHIARA
MORANO, CHIARA
Dipartimento di Ingegneria Meccanica, Energetica e Gestionale
A Comprehensive Literature Review for Total Hip Arthroplasty (THA): Part 2—Material Selection Criteria and Methods
2025-01-01 Garofalo, Salvatore; Morano, Chiara; Bruno, Luigi; Pagnotta, Leonardo
A Comprehensive Literature Review of Total Hip Arthroplasty (THA): Part 1— Biomaterials
2025-01-01 Morano, Chiara; Garofalo, Salvatore; Bertuccio, Paolo; Sposato, Agata; Zappone, Irene; Pagnotta, Leonardo
A Comprehensive Literature Review of Total Hip Arthroplasty (THA): Part 1—Biomaterials
2025-01-01 Morano, C.; Garofalo, S.; Bertuccio, P.; Sposato, A.; Zappone, I.; Pagnotta, L.
A critical review of transitioning from conventional actuators to artificial muscles in upper-limb rehabilitation devices
2024-01-01 Garofalo, Salvatore; Morano, Chiara; Perrelli, Michele; Pagnotta, Leonardo; Carbone, Giuseppe; Mundo, Domenico; Bruno, Luigi
Additive manufactured parts produced by selective laser sintering technology: Porosity formation mechanisms
2023-01-01 Morano, C.; Pagnotta, L.
Additive Manufactured Parts Produced Using Selective Laser Sintering Technology: Comparison between Porosity of Pure and Blended Polymers
2023-01-01 Morano, Chiara; Pagnotta, Leonardo
Analysis of crack trapping in 3D printed bio-inspired structural interfaces
2018-01-01 Morano, Chiara; Bruno, Luigi; Pagnotta, Leonardo; Alfano, Marco
Analysis of debonding in bio-inspired interfaces obtained by additive manufacturing
2018-01-01 Alfano, M; Morano, C; Bruno, L; Muzzupappa, M; Pagnotta, L
Analysis of the resistance of adhesively bonded joints with rigid-flexible substrates
2021-01-01 Dicosta, F; Morano, C; Alfano, M; Furgiuele, F
Appraisal of surface preparation in adhesive bonding of additive manufactured substrates
2021-01-01 Frascio, M; Mandolfino, C; Moroni, F; Jilich, M; Lagazzo, A; Pizzorni, M; Bergonzi, L; Morano, C; Alfano, M; Avalle, M
Biomimetic characterization by micro-computed tomography (μCT) of 3D hollow fibre membrane network bioreactors for tissue engineering
2026-01-01 Falvo D'Urso Labate, G.; Morano, C.; De Schryver, T.; Zaverdas, H.; De Napoli, L.; Fragomeni, G.; Van Hoorebeke, L.; Segers, P.; Boone, M. N.; Theofilatos, K.; Gerlach, J. C.; Catapano, G.
Caratterizzazione Meccanica di Membrane Polimeriche Nanoriforzate per l’imballaggio
2023-01-01 Morano, C.; Curulli, A.; Coppola, G.; Candamano, S.; Pagnotta, L.
Caratterizzazione Meccanica E Morfologica Di Campioni Polimerici Realizzati Tramite Produzione Additiva Mediante Micro Tomografia Computerizzata
2021-01-01 Morano, C.; Formoso, V.; Pagnotta, L.
Caratterizzazione Sperimentale delle Proprietà Meccaniche di Campioni in PA12 Realizzati Tramite Produzione Additiva
2022-01-01 Morano, C.; Alfano, M.; Pagnotta, L.
Comportamento meccanico di interfacce bio-inspirate realizzate mediante additive manufacturing
2016-01-01 Alfano, Marco; Bruno, Luigi; Morano, C.; Pagnotta, Leonardo
Crack propagation in adhesive bonded 3D printed polyamide: Surface versus bulk patterning of the adherends
2024-01-01 Morano, Chiara; Scagliola, Matteo; Bruno, Luigi; Alfano, Marco
Development of a Dynamic Fixing System for Wearable Robotics
2025-01-01 Perrelli, Michele; Leone, Simone; Garofalo, Salvatore; Morano, Chiara; Carbone, Giuseppe
Effect of induced plastic strain on the porosity of PA12 printed through selective laser sintering studied by X-ray computed micro-tomography
2023-01-01 Morano, C; Crocco, Mc; Formoso, V; Pagnotta, L
Effect of Mechanical Pretreatments on Damage Mechanisms and Fracture Toughness in CFRP/Epoxy Joints
2021-01-01 Morano, Chiara; Tao, Ran; Alfano, Marco; Lubineau, Gilles
Effect of Strain Rates and Heat Exposure on Polyamide (PA12) Processed via Selective Laser Sintering
2023-01-01 Morano, Chiara; Alfano, Marco; Pagnotta, Leonardo