In this paper, the effect of acidity of zeolites with FER framework was studied in the methanol dehydration to dimethyl ether reaction, by comparing catalysts with different Si/Al ratios (namely 8, 30 and 60). The aim of this work was to investigate how the acid sites concentration, strength, distribution and typology (Brønsted and Lewis) affect methanol conversion, DME selectivity and coke formation. It was found that the aluminium content affects slightly acid sites strength whilst a relevant effect on acid sites concentration and distribution (Brønsted /Lewis) was observed as 24% of Lewis sites were found on Al-richest samples, whilst less than 10% of Lewis acid sites were observed on FER at higher Si/Al ratio. All the investigated catalyst samples showed a selectivity toward DME always greater than 0.9 and samples with the lowest Si/Al ratio exhibit the best performances in terms of methanol conversion, approaching the theoretical equilibrium value (around 0.85) at temperatures below 200. °C. Turnover-frequency analysis suggests that this result seems to be related not only to the higher amount of acid sites but also that the presence of Lewis acid sites may play a significant role in converting methanol. On the other hand, the presence of Lewis acid sites, combined with a high acidity, promote the formation of by-products (mainly methane) and coke deposition during the reaction. As final evidence, all the investigated catalysts exhibit very high resistance to deactivation by coke deposition, over 60. h continuous test, and a GC-MS analysis of the coke deposited on the catalyst surface reveals tetra-methyl benzene as main component.
The effect of FER zeolite acid sites in methanol-to-dimethyl-ether catalytic dehydration
Catizzone E;Aloise A;MIGLIORI, Massimo;GIORDANO, Girolamo
2017-01-01
Abstract
In this paper, the effect of acidity of zeolites with FER framework was studied in the methanol dehydration to dimethyl ether reaction, by comparing catalysts with different Si/Al ratios (namely 8, 30 and 60). The aim of this work was to investigate how the acid sites concentration, strength, distribution and typology (Brønsted and Lewis) affect methanol conversion, DME selectivity and coke formation. It was found that the aluminium content affects slightly acid sites strength whilst a relevant effect on acid sites concentration and distribution (Brønsted /Lewis) was observed as 24% of Lewis sites were found on Al-richest samples, whilst less than 10% of Lewis acid sites were observed on FER at higher Si/Al ratio. All the investigated catalyst samples showed a selectivity toward DME always greater than 0.9 and samples with the lowest Si/Al ratio exhibit the best performances in terms of methanol conversion, approaching the theoretical equilibrium value (around 0.85) at temperatures below 200. °C. Turnover-frequency analysis suggests that this result seems to be related not only to the higher amount of acid sites but also that the presence of Lewis acid sites may play a significant role in converting methanol. On the other hand, the presence of Lewis acid sites, combined with a high acidity, promote the formation of by-products (mainly methane) and coke deposition during the reaction. As final evidence, all the investigated catalysts exhibit very high resistance to deactivation by coke deposition, over 60. h continuous test, and a GC-MS analysis of the coke deposited on the catalyst surface reveals tetra-methyl benzene as main component.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.